19
Error description
List of errors
The DBS Monitor shows errors as follows
Error
Illustration
Description
0
No flashing lights, no acoustic signal
No error
1
Low Battery
Led flashing, acoustic
signal
Deep discharge
Charge and check the batteries,
possibly defective battery
2
Linked
Led flashing, audible signal
Link error
Possible faulty battery or defective relay.
3
Top
Charge Led flashing, audible
signal
Over-voltage
The batteries are charged with excessive voltage. If
this happens too long, the batteries can be over-
charged. Check the load voltage and check.
*Acoustic signal can be suppressed (see
Setting the modes
on page 8).
**Acoustic signal of under-voltage error 1 can be muted (see
Explanation: Buttons
p. 18). If device
audible signal changes instead of being muted immediately charge the respective battery due to super
low voltage!
Measures / Suspension
There are two ways to perform a
system reset
:
Pushing the
Link- and Auto-button
simultaneously will cause a system reset and restart the
monitor.
The monitor is also reset by pulling the monitor out and plugging it back in again (the plug is
about 15cm behind the monitor).
In case of a not fully working system please check the configuration in
starting the monitor
on page 8.
