Q-1
: Trouble Syncing to iBobber?
A-1
: First, the iBobber may simply be powered off. It automatically
powers on when it connects with water. Note: When fully charged, the
iBobber turns on when disconnected from the charger and remains on
for 10 minutes. This is for when you need need to update firmware (page
25). Cast the iBobber into the water you're fishing, or immerse it in any
other water (glass, sink, bathtub) and the iBobber sync should be visible
in Settings > Bluetooth Sync >.
A-2
: The battery in the iBobber may be low. Recharge the iBobber in the
USB charger. Wait until it the iBobber is charged and you can return to
syncing the iBobber.
A-3
: The iBobber may not sync with your mobile device or tablet because
of a Bluetooth issue with your device. Completely shut off and restart
your device. This will clear the Bluetooth cache and should allow iBobber
to connect. You may need to do this a few times.
A-4
: The iBobber may be too far from your mobile device (more than
100') or waves might be periodically blocking the Bluetooth signal, or
there may be obstructions in the way of the signal. Try reducing the
distance or remove the obstructions and you should be able to sync.
23
Troubleshooting (1 of 2)
Fishfinder
Summary of Contents for CGG-MY-IBOBBER
Page 1: ...Product Information Guide ...
