Overcurrent circuit breaker switched off
Start the breaker
Pump damaged
Głośna praca systemu
Niedobór ciepła w instalacji
Issue:
The pump fails to launch
Tripped installation fuse
Check the cause, replace the fuse
Possible cause;
Solution;
Replace the pump
Voltage too low
Check if the main voltage is compliant
Air in the installation
Vent the installation
Flow too high
Decrease the inflow pressure at the
pump inlet
Inflow pressure too low - cavitation
Increase the inflow pressure at the inlet to
the pump
UTILISATION
The used product is subject to disposal as wastes only in selective waste collection systems organised
by the Network of Communal Electric and Electronic Waste Collection Centres. The customer is
entitled to return the used equipment to the network of the electric equipment distributor, at least for
free and directly, if the returned device is of proper type and fulfils the same function as a newly purchased device. It is
prohibited to dispose of electric equipment together with other household wastes.
USE AND CARE GUIDE E-IBO
15
Gawartowa Wola 23.11.2018
Adam Jastrzębski
EC DECLARATION OF CONFORMITY (Moduł A):
Circulating pumps E-IBO 15-14
2. PHU Dambat, Gawartowa Wola 38, 05-085 KAMPINOS, POLAND, e-mail:
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Pumps form point 1.
5.
We
declare with full responsibility that pumps included in the point 1. to which this declaration refers to are
consistent
with the following guidelines of the Council on legal regulations unification in member states of EC:
-
Directive LVD Nr. 2014/35/UE
-
Directive EMC Nr. 2014/30/UE
-
Directive MD No. 2006/42/EC
-
Directive ErP
Nr. 2009/125/EC. EC commission regulation No 622/2012 art.1 pt. 2, letter a. circulating pumps
6.
Applied standards:
EN 60204-1:2006+A1:2009+AC2010, EN 809:1998+A1:2009+AC:2010, EN 62233:2008,
EN 60335-1:2012+A11:2014+A13:2017, EN 60335-2-41:2003+A1:2004+A2:2010,EN 55014-1:2017, EN5014-2:
2015, EN 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
