IBM Z9, Planning Manual

Page: 191 / 274

Parameter Descriptions
Note: Depending on the processor page, (see Figure 3-20, Figure 3-21 and
Figure 3-22) some of the following parameters may not be present.
Group Name If you choose to assign the processor to a group, select a defined
group from the drop-down list.
Dedicated processors
Select this option if you want to select general purpose CPs, IFAs
or zIIPs to be dedicated when the LP is activated. You can then
specify the number of initial and reserved processors for each.
Not dedicated processor details
Select the processor (CPs, IFAs, or zIIPs) to display details such as
Initial processng weight, Initial capping, and Enable workload
manager.
Dedicated central processors
Select this option if you want the general purpose CPs that are
allocated for the LP to be dedicated when the LP is activated.
Figure 3-22. Customization for a Coupling Facility Mode Logical Partition with Dedicated Internal Coupling Facilities
(ICFs) and shared Central Processors. There can be both an initial and reserved specification for the ICFs and the
Central Processors.
Chapter 3. Determining the Characteristics of Logical Partitions
3-65