IBM xSeries 440 8687, Option Installation Manual

Page: 62 / 80

50
xSeries 440:Option Installation Guide
Cabling the server
See “I/O connectors and indicators on your server” on page 51 for a description of the
I/O connectors on the rear of the server.
The following illustration shows the cable routing for a typical server configuration.
Detailed cabling instructions, including the use of the cable management arm (that
came with the server) are in the Rack Installation Instructions provided with the server.
Notes:
1. The illustrations in this document might differ slightly from your hardware.
2. See the documentation that comes with the options for additional cabling instruc-
tions. It might be easier for you to route any cables before you install certain
options.
3. If you have just plugged the power cords of the server into an electrical outlet, you
must wait 30 seconds before pressing the power-control button.
Cable straps