IBM x3800 - System - 8865, Manual

Page: 102 / 196

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v
See Chapter 3, “Parts listing, System x3800 Type 8865,” on page 107 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a
trained service technician.
Error code Description Action
180-xxx-008 Failed I/O board LED test.
1. Reseat the I/O board.
2. Replace the I/O board.
180-xxx-009 Failed Active
™
PCI LED test.
1. Reseat the following components:
a. (Trained service technician only) PCI-X switch
card assembly
b. I/O board
2. Replace the components listed in step 1 one at a
time, in the order shown, restarting the server
each time.
201-198-000 Memory Test Aborted: Could not run the
test; suspect microprocessor tray error.
1. Restart the server.
2. Run the diagnostic test again.
3. Reinstall the diagnostic programs (see “Updating
the firmware” on page 157).
4. (Trained service technician only) Replace the
microprocessor tray.
201-198-00n Memory Test Aborted: Could not run the
test.
Note: n = 1-9 (programming error).
1. Restart the server.
2. Run the diagnostic test again.
3. Reinstall the diagnostic programs (see “Updating
the firmware” on page 157).
201-xxx-CBN Failed Memory Test: See “Memory card and
memory module (DIMM)” on page 126.
v C = memory card [1-4]
v
B = physical bank [1-2]
Note: Bank 1 = DIMMs 1 and 3; Bank 2
= DIMMs 2 and 4
v
N = failing DIMM [1-4]
1. Reseat the following components:
a. DIMM N
b. Memory card C
2. Replace the components listed in step 1 one at a
time, in the order shown, restarting the server
each time.
Note: N = 9 indicates both DIMMs in physical bank
B and memory card C.
202-xxx-0nn Failed system cache test, where nn=APIC
ID.
APIC ID Microprocessor
00, 01 1
06, 07 2
10, 11 3
16, 17 4
1. Reseat the following components:
a. (Trained service technician only)
Microprocessor nn
b. Microprocessor tray
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. (Trained service technician only)
Microprocessor nn
b. (Trained service technician only)
Microprocessor tray
86
IBM System x3800 Type 8865: Problem Determination and Service Guide