d. Fully seat the WorkPad z50 as follows: Make sure that the
triangle
.1/
of the cradle aligns with the triangle
.3/
of the
WorkPad z50.
1
3
External power charge status LED
After you attach your WorkPad z50 to the cradle, the
external power charge status LED is on.
Attention
Do not push the center of the cover when you seat the
WorkPad z50 to the cradle. If you do, you might damage
the LCD.
5
Resume the WorkPad z50 using its power button. Your
WorkPad z50 resumes operation.
You have completed attaching your WorkPad z50 to your
notebook PC or desktop PC through the cradle.
Detaching your WorkPad z50 from the
cradle
To detach your WorkPad z50 from the cradle, do as follows:
1
Press the power button to put your WorkPad z50 into suspend
mode and close the LCD.
2
Push both eject levers of the cradle
.1/
; then remove your
WorkPad z50
.2/
.
1
1
2
Note: Always push both eject levers.
Part 1. Using the cradle
1-5
All manuals and user guides at all-guides.com
