Adding Additional Computers
If you have other computers on your network, you are now ready to connect them. Each computer you want to connect to Web Point
must have both a Network Interface Card installed and TCP/IP installed. Follow these steps to set up additional computers:
1
Connect each computer to Web Point using Ethernet (10BaseT) cables. (If you have a Home Network Connection Center installed,
connect Ethernet cables to a computer tap point mounted in the wall.)
2
Turn on the computer.
3
Insert the
EasyStart CD in the CD-ROM drive and run EasyStart. Follow steps 1 to 5 in “Setting Up a New Network.”
4
Restart the computer if requested by
EasyStart.
5
The “DHCP Verifier” screen will open. Click
Browse Internet
.
The computer should connect to the Internet through Web Point and the new network you just created.
Notes: If you have trouble connecting to the Internet, see “Troubleshooting” in the
Reference Manual.
You do not need to reconfigure Web Point when setting up additional computers on the network.
Summary of Contents for WebPoint
Page 11: ......
