4
1: I
NSTALLATION
Introduction
The IBM
®
UPS 3U Extend Run Battery Pack, for use with the IBM
UPS 7500XHV
and
UPS 10000XHV
, provides extended
load protection and extra security during the uninterruptible power supply battery replacement.
The IBM
UPS 7500XHV
and
UPS 10000XHV
can support up to four external battery packs. Both units use the 3U Extend Run
Battery Pack and are designed to operate in the rack-mount and tower configurations.
Battery pack connectors are color-coded and keyed to prevent improper connection.
For battery replacement and service information, see the
Uninterruptible Power Supply Operation and Setup Guide.
Unpacking
Attention:
Read the Safety Instructions before you install the battery packs.
Note:
The illustrations in this document might differ slightly from your hardware.
Inspect the battery pack upon receipt. Accidents and damage can occur during shipment. Notify the carrier and your IBM mar-
keting representative or authorized reseller if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
!
Battery pack
!
Front bezel
!
Rail kit
!
Tower conversion kit
!
Accessory kit containing:
!
Quick Installation Guide
!
Documentation CD
!
Warranty flyer
!
Rack-mounting brackets
!
Hardware
You will need the following tools to install the battery pack:
!
Utility knife or scissors
!
Two Philips screwdrivers (#1 and #2)
!
Two wrenches (7/16” and 1/4”)
!
Cage nut insertion tool or flat-blade screwdriver (for installing cage nuts in some rack cabinets)
Removing the Battery Modules
Attention:
The battery pack is heavy. To lighten the weight of the unit, remove the battery modules.
!
Remove the battery door.
"
Remove the battery modules.
