IBM Ultrium Gen 6, Installation And User Manual

Page: 67 / 118

spring clips (see“Repositioning a leader pin” on page 69). If the leader pin has
become dislodged, see Appendix D, “Repairing a cartridge,” on page 69.
v
Do not handle tape that is outside the cartridge. Handling the tape can damage
the tape surface or edges, which might interfere with read or write reliability.
Pulling on tape that is outside the cartridge can damage the tape and the brake
mechanism in the cartridge.
v Do not stack more than six cartridges.
v
Do not degauss a cartridge that you intend to reuse. Degaussing makes the tape
unusable.
Tape cartridge packaging
Tape cartridge packaging details.
v
When shipping a cartridge, use the original or better packaging.
v
Always ship or store a cartridge in a jewel case.
v
Use only a recommended shipping container that holds the cartridge securely in
its jewel case during transportation. Ultrium Turtlecases (by Perm-A-Store) have
been tested and found to be satisfactory. They are available at
http://www.turtlecase.com .
v
Never ship a cartridge in a commercial shipping envelope. Always place it in a
box or package.
v
If you ship the cartridge in a cardboard box or a box of a sturdy material, make
sure that the following conditions are met:
– Place the cartridge in polyethylene plastic wrap or bags to protect it from
dust, moisture, and other contaminants.
Figure 10. Tape cartridges in a Turtlecase
Chapter 4. Using Ultrium Media
49