You can accept the default settings with Host Adapter SCSI Termination set to Automatic.
If you wish to accept the default settings, press ESC to return to the previous menu.
Select the SCSI Utilities.
This shows all devices attached to the Bus. To do a Verify Media, highlight the drive you would like to
verify and press Enter. If you wish to accept all settings, press ESC to exit out of the Adaptec settings
and continue with the next step, partitioning and formatting your drive.
Step 10: FDISK
Type FDISK at the A:\ prompt after booting to a bootable diskette. If Windows® 95 OS/R2 or Windows®
98 is used, the following screen will appear.
IBM storage products
Page 14
IBM Hard Disk Drive Technical Support Center version 1.0
