IBM Turbo 16/4 Token-Ring PC Card 2, User Manual

Page: 39 / 123

Table 4. Novell NetWare Driver Parameters (continued)
Parameter Explanation
TPRn= TCP Port Range. This represents a set of parameters which
designate the transmit frame priority value for a specified TCP port
range. n is 1, 2, 3, 4, or 5. The format of this 9-digit hexadecimal
string is:
<PortNumber><PortNumber><PriorityValue>
where each PortNumber is a four-character hex value and
PriorityValue is a one-character hex value. The two PortNumber
fields define a starting and ending value that make up a range, with
the starting value less than or equal to the ending value.
Valid values:
PortNumber
0x0000 to 0xFFFF
PriorityValue
1 to 6
There is no default for this parameter.
UPRn= UDP Port Range. This represents a set of parameters which
designate the transmit frame priority value for a specified UDP port
range. n is 1, 2, 3, 4, or 5. The format of this 9-digit hexadecimal
string is:
<PortNumber><PortNumber><PriorityValue>
where each PortNumber is a four-character hex value and
PriorityValue is a one-character hex value. The two PortNumber
fields define a starting and ending value that make up a range, with
the starting value less than or equal to the ending value.
Valid values:
PortNumber
0x0000 to 0xFFFF
PriorityValue
1 to 6
There is no default for this parameter.
Windows Installation
Windows 95 and Windows 98
1. Insert the IBM Turbo 16/4 Token-Ring PC Card 2 in your computer and switch it
on. When Windows loads, it will alert you to the fact that new hardware was
found in your computer. If it does not, see “Troubleshooting and Error Codes” on
page 50.
2. When the Update Device Driver Wizard (Windows 95) or the Add New
Hardware Wizard (Windows 98) appears, insert the CD-ROM or diskette that
contains the driver files.
3. Follow the instructions on the panels to install the driver files for the IBM Turbo
16/4 Token-Ring PC Card 2. During installation, you might be prompted to insert
the diskette labeled IBM Shared RAM Token-Ring Adapter NDIS 3/4/5 Device
Drivers. At this point, click OK and select the path to the driver diskette or
CD-ROM in the copy files from box. You might also be prompted to insert the
Chapter 4. Software Installation
23