IBM TS2250, Setup, Operator, And Service Manual

Page: 109 / 149

Step 2. Remove the Internal Drive
1. Unplug the SAS interface cable and the ethernet interface cable (
1
and
2
in
Figure E-2) from the drive. Disconnecting the internal SAS interface cable
disconnects both the SAS interface and electrical power from the drive.
Attention: DO NOT UNPLUG THE INTERNAL POWER CABLE.
2. Press the latch assembly to release the drive.
1
2
a80hh045
Figure E-2. Removing cables from the internal drive
Appendix E. Information for Trained Service Personnel
E-3