background image

IBM storage products

Page 2

IBM Hard Disk Drive Technical Support Center                                                                                                                                                   version 3.0

Configuring your computer

1. If your computer has a plug-in IDE card with a drive
installation procedure, follow the manufacturer’s in-
structions.
2. Plug in the power cord and power on your com-
puter.  Your computer may detect a configuration
change and prompt you to proceed to the Setup
screen.
3. If your computer does not prompt you to recon-
figure, enter your computer’s Setup, typically by key
selection or keyboard combinations during power-on
or during a reboot.  Refer to your computer’s docu-
mentation for the proper key sequence.  If the com-
puter fails to boot up, power off, remove the new hard
drive and return your system to its original configur-
ation.  Reboot and enter your computer’s Setup.
Follow the directions in step 4, then reattach the new
hard drive.
4.  Select “Auto Detect” if your computer Setup sup-
ports this feature.  If your computer does not Auto
Detect the drive, select the appropriate UDT (User
Definable Type) for the model being installed.  
Then run Disk Manager.

4320MB

63

16

8,944

DKLA-24320

3250MB

63

16

6,304

DKLA-23240

2160MB

63

16

4,200

DKLA-22160

Capacity

Sector

/Track

Heads

Cylinders

IBM Model

Number

Running Disk Manager

1. Boot to operating system from the hard drive or the
diskette.
2. Insert the Ontrack diskette.
3. Type DM and press [ENTER] to run Disk Manager.
4. Under “Select an Installation Option”, select (E)asy
Disk Installation.
5. Select a drive for installation; Disk Manager will
partition and format the drive.
6. A status dialog will indicate a successful instal-
lation.

If, after complete installation, your system will not
boot up, recheck all settings.  If the system still fails to
boot up, remove the new drive from your system to
return to your original configuration and contact tech-
nical support.

®

© International Business Machines Corporation 1999

www.ibm.com/harddrive

IBM Hard Disk Drive Technical Support Center

3605 Highway 52 North
Rochester, MN 55901
Telephone: 888.IBM.5214 or 507.286.5825
Fax: 507.253.DRIVE
E-mail: [email protected]

Singapore Technical Support Center

Telephone: (65)6418.9595 or 1800.418.9595
E-mail: [email protected]

IBM Systems Storage Division

5600 Cottle Road
San Jose, CA 95193
www.ibm.com/storage

Asia-Pacific Headquarters: 65.320.1234

European Headquarters: 44.01.705.561.871

Japan Sales Branch Office: 81.46645.1039

Printed in the United States of America
01-99
All Rights Reserved

IBM is the registered trademark of International Business Machines Corporation.

Other company, product, and service names may be trademarks or service marks of others.

Produced by the IBM Hard Disk Drive Technical Support Center.

OEM Hark Disk Drive Specifications for DKLA-22160/23240/24320, revision 1.1

Product Description data represents IBM’s design objectives and is provided for
comparative purposes; actual results may vary based on a variety of factors.  This product
data does not constitute a warranty.  Questions regarding IBM’s warranty terms or
methodology used to derive this data should be referred to the IBM Hard Disk Drive
Technical Support Center.  Data subject to change without notice.

Date:  14 January 1999

Reviews: