IBM TrackPoint USB Space Saver Keyboardwith Hub, User Manual

Page: 27 / 48

v
Try adjusting the Click Pace on the Press-to-Select page and the Sensitivity
slider on the Sensitivity page. A harder tap might be needed to activate
Press-to-Select.
The cursor moves when you are not touching the TrackPoint stick.
This movement might occur if the keyboard is close to an electromagnetic
source such as a computer monitor, or if the keyboard is being flexed. Try
moving the keyboard to a different location.
You cannot locate the TrackPoint cursor on the screen.
Take the following actions:
v
Try moving the TrackPoint stick in one direction for several seconds. Look to
that side of the screen, and then move the TrackPoint stick in the opposite
direction. The cursor will appear on that side of the screen.
v
In the Mouse Properties window, enable pointer trails. To enable pointer
trails using keyboard buttons, follow these steps.
1. Press the Windows key. Or, press the Ctrl (Control) and Esc (Escape)
keys at the same time.
2. Use the up-arrow key to select Settings .
3. Press the right-arrow key to select Control Panel, and then press Enter .
4. Use the arrow keys to select the Mouse icon, and then press Enter .
5. Use the Tab key to select from the menu.
6. Using the arrow keys to select the Pointers tab.
7. Use the arrow and tab keys to select enable pointer trails and press
Enter .
Appendix B. Problem solving
B-3