IBM TotalStorage L10, Cli Reference Manual

Page: 71 / 96

Chapter 4. Show menu (root/show)
59
Displaying detected ordered sets (root/show/os)
This command displays the detected ordered sets for a single port or for all ports.
To view the detected ordered sets for all ports:
From the Show menu (root/show), type
os
and press E
NTER
.
To view the detected ordered sets for a specific port:
From the Show menu (root/show), type
os <port number>
and press E
NTER
.
For a list of ordered set detections and their indications, see Chapter 3: Displaying
detected ordered sets (root/diag/os) on page 50.
Displaying port AL_PAs (root/show/galpa)
This command displays all of the AL_PAs for a single port or for all ports. This
information is useful when configuring load balancing and route blocking.
To view the AL_PAs for all ports:
From the Show menu (root/show), type
galpa
and press E
NTER
.
To view the AL_PAs for a specific port:
From the Show menu (root/show), type
galpa <port number>
and press E
NTER
.
Displaying LIM port (root/show/glim)
This command displays the Loop Initialization Master (LIM) port for a single zone or for
all zones. The LIM port is responsible for starting the change notification process in
each zone.
To view the LIM ports for all zones:
From the Show menu (root/show), type
glim
and press E
NTER
.
To view the LIM port for a specific zone:
From the Show menu (root/show), type
glim <zone number>
and press E
NTER
.
Displaying sensor information (root/show/sensors)
This command displays switch sensor information, including enclosure temperature and
fan status.
To view switch sensor information:
From the Show menu (root/show), type
sensors
and press E
NTER
.