IBM TotalStorage L10, Cli Reference Manual

Page: 50 / 96

2006 Model L10 Storage Switch
38
Deleting ports members from trunk groups (root/config/trunk/delprt)
This command removes port members from a trunk group. In order to delete a member,
the member must be explicitly removed from the trunk group.
To delete a port from a trunk group:
From the Trunking configuration menu (root/config/trunk), type
delprt <trunk group
number> <port members>
and press E
NTER
.
Note: To delete multiple port members, use commas between port members.
For example, to remove port members 5 and 7 from trunk group 1, which contains port
members 3, 5, and 7:
Type
delprt 1 5,7
and press E
NTER
.
Displaying port members on a trunk group
(root/config/trunk/showmem)
This command displays the port members within a specific trunk group.
To display the port members in a specific trunk group:
From the Trunking configuration menu (root/config/trunk), type
showmem <trunk
group number>
and press E
NTER
.
To display the port members for all trunk groups:
From the Trunking configuration menu (root/config/trunk), type
showmem
and press
E
NTER
.
Clearing trunk groups (root/config/trunk/clr)
This command clears all members from a specific trunk group. To remove all members
from all trunk groups, use 0 as the trunk group number.
To clear the port members for all trunk groups:
From the Trunking configuration menu (root/config/trunk), type
clr 0
and press E
NTER
.
To clear the port members for a specific trunk group:
From the Trunking configuration menu (root/config/trunk), type
clr <trunk group
number>
and press E
NTER
.