IBM TotalStorage L10, Cli Reference Manual

Page: 11 / 96

© Copyright IBM Corp. 2004
ix
About this document
This guide describes how to configure and manage an IBM TotalStorage® Storage
Switch 2006 Model L10 using the Command Line Interface (CLI).
Throughout the rest of this document, the IBM TotalStorage Storage Switch 2006 Model
L10 is referred to as the Model L10, the L10, or simply the switch.
The sections that follow provide information about:
• “Model L10 library”
• “Web sites”
• “Getting software updates”
• “Getting help”
• “How to send your comments”
Model L10 library
The following documents contain information related to this product:
•
IBM TotalStorage Storage Switch 2006 Model L10 User’s Guide
, GC26-7651-00
•
IBM TotalStorage Storage Switch 2006 Model L10 CLI Reference Guide
,
GC26-7652-00 (this document)
•
IBM TotalStorage Storage Switch 2006 Model L10 Quick Reference Card
,
GC26-7653-00
•
IBM TotalStorage Storage Switch 2006 Model L10 Statement of Limited Warranty
,
GC26-7657-00
•
IBM Safety Notices
, SD21-0030-05
Web sites
You can find additional information related to the software for this and other switches at
the following Web site:
http://www.ibm.com/servers/storage/support/san
To get specific details about models and firmware that the switch supports, see the
following Web site:
http://www.storage.ibm.com/ibmsan/
For detailed information about the Fibre Channel standards, see the Fibre Channel
Industry Association (FCIA) Web site at:
www.fibrechannel.org/
For a directory of worldwide contact information, including technical support, see the
following Web site:
www.ibm.com/contact/