IBM TotalStorage FAStT700, User Manual

Page: 73 / 100

5. Remove the protective cap from the SFP module, as shown in Figure 47 .
Protective cap
SFP module
Plastic tab
6. Insert the SFP module into the mini-hub port until it clicks into place.
OU
T
IN
!
2 G
b/s
1 G
b/s
OU
T
IN
!
2 G
b/s
1 G
b/s
OU
T
IN
!
2 G
b/s
1 G
b/s
OU
T
IN
!
2 G
b/s
1 G
b/s
SFP module
Fiber-optic
cable
7. Reconnect the fiber-optic cables that you removed in Step 1 on page 53.
8. Check the indicator lights on the mini hub.
When the mini hub is operating properly, the green loop good light is lit and the
fault light is not lit. If the mini-hub port is in normal operation, the amber port
bypass light is not lit. If a problem is indicated, use the storage-management
software to check the FAStT700 Storage Server status. For more information,
see “Mini-hub indicator lights” on page 27.
Figure 47. Small Form-Factor Pluggable (SFP) Module
Figure 48. Installing an SFP module in a mini hub
Chapter 3. Replacing FAStT700 Storage Server components
55