manualshive.com logo in svg

IBM TotalStorage Enterprise 3592, Maintenance Information

Share
Download
IBM TotalStorage Enterprise 3592 Maintenance Information Download Page 166

VPD Options…

This menu provides the same function as described in “CE Config/Install menu” on page 118, but with

the addition of the Clear All BVPD function. It is a Manufacturing-only function that is used to reset all

BVPD information.

Allow Alter PVPD

Conditions the microcode to allow access and altering of the privileged vital product data.

Loop Diags

Allows the CE to run read/write, read/write (short), compactor diag, or compliance tests.

CE H SARS Config menu
Notes:
• Use this only when directed by your next level of support.
• A password is required to gain access to this menu item.
Table 119 on page 146 shows the HSARS Configuration menu items. This menu allows CEs and

engineering staff to display the HSARS Configuration.
The possible HSARS config options are displayed. The current selection displays in a lighter, dotted font,

which indicates that it is active. Selecting another option lightens that option (indicating that it is now

active) and darken the originally active option. The current config selection also is shown on the right side

of the service panel.

Table 119: HSARS Config menu
Function

Next menu

Cancel

“CE Engr Use Only menu” on page 145

Default HSARS

-

Disable HSARS

-

Cancel

Causes the “CE Engr Use Only menu” on page 145 to display.

Default HSARS

Enables HSARS. Default is Enabled.

Disable HSARS

Causes the HSARS function to be disabled.

CE V SARS Config menu
Notes:
• Use this only when directed by your next level of support.
• A password is required to gain access to this menu item.
Table 120 on page 147 shows the VSARS Configuration menu items. This menu allows Engineering to

display and configure the VSARS area after the password is entered.
The possible VSARS Config options are displayed. The current selection displays in a lighter, dotted font,

which indicates that it is active. Selecting another option lightens that option (indicating that it is now

active) and darken the originally active option. The current config selection also is shown on the right side

of the service panel.

146  IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information

Summary of Contents for TotalStorage Enterprise 3592











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands