v
Ensure that all equipment has a reliable branch-circuit ground connection. Do not
rely on a connection to a branch circuit, such as a power strip.
v
Ensure that the rack is balanced and within the specified weight limits. Secure
the rack mechanically to ensure stability in the event of an earthquake.
General specifications
The 3534 Model F08 is an 8-port, dual-speed, auto-sensing fibre-channel switch. It
supports multiple F_port and FL_port connections, a single E_port connection, and
distributed name server (DNS). It is electro-magnetic compatibility (EMC) compliant.
Table 10 lists the general specifications for the 3534 Model F08.
Table 10. General specifications
Specification
Description
Configured port types
The 3534 Model F08 supports multiple
F_port and FL_port connections, and one
E_port connection.
EMI rating
An operating 3534 Model F08 conforms to
the EMI radiation levels specified by the
following regulations:
v
FCC Rules and Regulations, Part 15B,
Class A level
v
CISPR22 Class A
v
EN55022 Class A
v
VCCI Class A ITE
v
AS/NZS 3548 Class A
System architecture
Nonblocking shared-memory switch
System processor
Intel
®
80960VH, 100 MHz CPU
ANSI fibre-channel protocol
FC-PH (Fibre Channel Physical and
Signaling Interface standard)
Modes of operation
Fibre Channel Class 2 and Class 3
Fabric initialization
Complies with FC-SW 5.0
Internet protocol (IP) over fibre-channel
(FC-IP)
Complies with FC-IP 2.3 of the FCA profile
Aggregate switch input/output (I/O)
bandwidth
32 Gbps if all eight ports are running at 2
Gbps, full duplex
Frame buffers
26 buffers per E_port and 16 buffers per
F_port at 2112 bytes per frame
Port-to-port latency
Less than 2 microseconds with no contention
(destination port is free)
Data transmission range
v
Up to 13 m (42.65 ft) for passive copper
v
Up to 33 m (108.27 ft) for active copper
v
Up to 300 m (975 ft) for short wavelength
optical link
v
Up to 10 km (32 820 ft) for long
wavelength optical link
28
IBM TotalStorage
™
SAN Fibre Channel Switch: 3534 Model F08 Installation Guide
Summary of Contents for TotalStorage 3534-F08
