IBM TotalStorage 3534-F08, Installation Manual

Page: 25 / 81

Table 3 shows an example of a completed port configuration worksheet.
Table 3. Example of a completed port configuration worksheet
Port
number Device
name Device port Cable length Port type Notes Cable
number
0 2108-1 PMC1-1 2 m (6 ft) SW 200
1 2108-1 PMC2-2 2 m (6 ft) SW 201
2 2108-1 PMC3-3 2 m (6 ft) SW 202
3 3534-4 Port 5 2 m (6 ft) SW 203
4 3534-4 Port 4 2 m (6 ft) SW 204
5 Open 2 m (6 ft) SW 205
6 s1411201e0 P2-I3 25 m (82 ft) SW 206
7 s1411203e0 P2-I3 25 m (82 ft) SW 207
Table 4 shows an example of a completed zone definition worksheet.
Table 4. Example of a completed zone definition worksheet
Zone member type
(switch, port, WWN)
Zone member Zone configuration
name
Comments
Port (ID, P) 1, 5 Test_Zone_Config_1 K38 node 1
Port (ID, P) 1, 0 Same 2108-1 PMC1-1
Port (ID, P) 3, 3 Same 2108-2 PMC1-4
Port (ID, P) 3, 4 Same K38 node 2
Port (ID, P) 1, 7 Same EMC-1 dir 5 port 0
Port (ID, P) 3, 7 Same EMC-1 dir 5 port 0
Chapter 2. Planning the installation
7