IBM TotalStorage 3534-F08, Installation Manual

Page: 23 / 81

Chapter 2. Planning the installation
This chapter describes how to plan the installation of the 3534 Model F08 in an
operational environment and provides examples of completed planning worksheets.
For your convenience, blank planning worksheets have been provided for your use
in Appendix B, “Blank planning worksheets” on page 33. Make as many copies of
the blank worksheets as you need to plan the installation of your switches. Give
your system administrator copies of the completed worksheets.
Table 2 shows an example of a completed planning worksheet for an installed
switch. An explanation of each item in the worksheet follows the table.
Table 2. Example of a completed planning worksheet
Item Description
Firmware level V 3.1.0
Firmware location:
Server name C02STOR01
Username sanman
Directory G:\sanman\3534\firmware\v3.1
Switch name 3534SW1
Domain ID 1
FCnetID (Fibre-channel IP address)
FC netmask
WWN Supplied when the box is turned on
Role Principal switch
Syslog daemon IP address 192.20.236.4
Users defined - access level admin - admin, petuser - none
SNMP information:
System description TestSANlet1_3534SW1
System contacts (Contact name)
System location B/003-3 Col C-4
Event trap level 0 - 5 5
Enable authentication traps No
RW community string dingo
RO community string pet
Trap recipients IP address 192.20.236.3
License keys Required for optional features
The following is a description of the items in the planning worksheet.
Firmware level
The firmware levels for the 3534 and the required code for installation on a
Microsoft Windows NT TotalStorage Specialist workstation.
© Copyright IBM Corp. 2002
5