IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 385 / 605

Figure 232 shows the OS/2 2.11 version of the Change SNMP Trap Destinations
window.
The changes are activated when you select the Activate Changes push button. If
the SNMP daemon is running when you select Activate Changes , the Library
Manager kills it and restarts the daemon with the new changes.
Adding a Destination:
Perform the following steps to add an SNMP trap destination:
1. Enter the new SNMP trap destination in the New Trap Destination field.
2. Select the Add push button.
Deleting a Destination:
Perform the following steps to delete an SNMP trap destination:
1. In the list box, highlight the SNMP trap destination that you want to delete.
2.
Select the Delete push button.
OS/2 Version 4.0:
For OS/2 Version 4.0, the SNMP HRMCNFIG program configures SNMP trap
destinations. If you have OS/2 Version 4.0, selecting the Change SNMP trap
destinations option starts this program for you automatically.
Figure 233 on page 360 shows the SNMP Configuration window.
Figure 232. Change SNMP Trap Destinations Window (OS/2 2.11)
Chapter 6. Advanced Operating Procedures
359