IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 381 / 605

Cancel
Closes the Operator Intervention window without removing any
highlighted intervention items from the list.
Help for Interventions
Provides help about the highlighted intervention.
General Help
Provides help about the Operator Intervention window. The Help contains
a list of operator actions for every intervention condition.
Change System Administrator Password
Note:
You can change the system administrator password from the Specialist by
selecting
″
Change User Password
″
under
″
Manage Security
″
(see “Specialist
Features and Functions” on page 396).
The System Administrator Password window (Figure 229) allows you to change the
system administrator password, if it was selected during installation. The system
administrator password protects the following functions:
v Access to actions required as part of emergency power off (EPO) recovery
during Library Manager startup.
If during initialization the Library Manager determines that EPO recovery is
required, you are informed that either the system administrator or the service
representative password is required. When you enter the password, the Library
Manager displays the actions required for EPO recovery.
v
Inventory new storage
v Re-inventory complete subsystem
v
Shutdown
v Unlocking the keyboard and display when they have been locked by selecting
the Lockup Library Manager... option under the Mode window
v
Delete logical volumes
v Clear all operator interventions
a06c0016
Figure 229. System Administrator Password Window
Chapter 6. Advanced Operating Procedures
355