IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 281 / 605

The Cancel VTS Export/Import window has the following push buttons:
Take action
Sends the cancel request for the highlighted Export or Import operation.
Cancel
Closes the Cancel VTS Export/Import window. No action is taken.
Help Provides help about the Cancel VTS Export/Import window.
Manage Constructs and Pools
Note:
VTS indicates either VTS or the TS7700 Virtualization Engine.
The Manage Constructs and Pools window (Figure 155) provides access to multiple
panels that allow you to manage the storage management constructs and stacked
volume pool properties, move/eject stacked volumes, manage logical volumes, and
transfer LM administrative data. To access a management function, use the mouse
or keyboard to select a panel from the list box. Select the Open panel button.
Open panel
Select a panel from the listbox. Then, select this button to open the panel.
Exit Closes the Manage Constructs and Pools window.
Help Provides help about the Manage Constructs and Pools window.
Manage Storage Groups
Note: You can view the Manage Storage Groups window from the Specialist (see
“Specialist Features and Functions” on page 396).
The Manage Storage Groups window (Figure 156 on page 256) allows you to view
and manage storage groups. The following actions can be performed:
v
Add a storage group
v
Modify an existing storage group
v Delete a storage group
Figure 155. Manage Constructs and Pools Window
Chapter 6. Advanced Operating Procedures
255