IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 208 / 605

v OK indicates that the subsystem is functional.
v
Degraded indicates that part of the subsystem failed, but the subsystem can
function in a degraded manner.
For additional information, select Operational status... and Component
availability status... on the Status menu (see “Operational Status” on page 157).
Standby LM shows the status of the standby Library Manager:
v Enabled indicates that the standby Library Manager is functional.
v
Disabled indicates that the standby Library Manager is not functional and
causes the overall system to report Degraded .
v Not installed
indicates that the standby Library Manager feature is not installed.
v Degraded indicates that the standby Library Manager has lost one of its
communication links with the active LM.
Active Accessor shows the accessor that is active:
v
A indicates that accessor A is active.
v B indicates that accessor B is active.
v
None indicates that no accessor is active currently (both are unavailable).
v Both indicates that both accessors are active currently on a 3494 Tape Library
with the Dual Active Accessors feature installed.
Standby Accessor
shows the status of the standby accessor:
v Available indicates that the standby accessor can be used if an accessor
switchover occurs.
v
Service Mode indicates that the accessor is unavailable while being serviced.
v Not available indicates that the accessor has components marked unavailable
that make it unusable.
v
Not installed indicates that the second accessor is not installed.
v Not Taught indicates that the accessor has not completed a successful Teach
operation, thus making it unusable.
v
Blank indicates that both accessors are active.
Accessor shows the status of the cartridge accessor:
v OK
indicates that the cartridge accessor is functional.
v Failed indicates that the cartridge accessor failed and cannot function.
v
Degraded indicates that an accessor component has failed, but the accessor can
continue to function in a degraded manner.
Gripper shows the status of the gripper:
v OK indicates that the installed gripper on the cartridge accessor is functional.
v
Degraded indicates that one of two grippers failed on the cartridge accessor.
v Failed indicates that the gripper failed, and the cartridge accessor is unavailable
for use.
If the 3494 HA1 Option is installed,
Gripper
shows the status for both accessors:
v OK indicates that the grippers on both accessors are functional.
v
Degraded indicates that one of the grippers has failed on either the active or the
standby accessor. If dual grippers are installed, Degraded indicates that one,
two, or three of the grippers have failed.
182
3494 Tape Library Operator Guide