IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 177 / 605

Disable Dual Active Accessors
Note: This option is available only when the Dual Active Accessors feature is
installed.
The Disable Dual Active Accessors... option allows you to disable the Dual Active
Accessors feature manually. When selected, the Library Manager opens the Mark
Accessor Active window (Figure 77).
When you select an accessor to leave active, the Library Manager opens the Dual
Active Accessor Status window (Figure 78 on page 152).
Figure 76. Dual Active Accessor Status Window - Enabling
Figure 77. Mark Accessor Active Window
Chapter 6. Advanced Operating Procedures
151