IBM TotalStorage 2109 M12, Installation And Service Manual

Page: 13 / 159

Safety and environmental notices
This section contains information about:
v “Safety notices and labels”
v
“Safety inspections” on page xiv
v “Laser safety” on page xxi
v
“Rack Safety” on page xxii
v “Environmental notices and statements” on page xxiv
Safety notices and labels
When using this product, observe the danger, caution, and attention notices
contained in this guide. The notices are accompanied by symbols that represent the
severity of the safety condition.The danger and caution notices are listed in
numerical order based on their IDs, which are displayed in parentheses, for
example (D004), at the end of each notice. Use this ID to locate the translation of
these danger and caution notices in the IBM
®
eServer
™
Safety Notices
(G229–9054) publication, which is on the CD-ROM that accompanies this product.
See the following examples of danger and caution notices for the location of the ID
number.
Danger notices
A danger notice calls attention to a situation that is potentially lethal or extremely
hazardous to people. A lightning bolt symbol accompanies a danger notice to
represent a dangerous electrical condition. A sample danger notice follows:
DANGER
An electrical outlet that is not correctly wired could place
hazardous voltage on metal parts of the system or the devices
that attach to the system. It is the responsibility of the customer
to ensure that the outlet is correctly wired and grounded to
prevent an electrical shock. (D004)
A comprehensive danger notice provides instructions on how to avoid shock
hazards when servicing equipment. Unless instructed otherwise, follow the
procedures in the danger notice below:
© Copyright IBM Corp. 2004
xi