ENGLISH
13
To install the device driver in Windows XP, do the following:
Note:
You must download files from the
User’s Guide and Installation Files CD
to
use the Plug and Play feature in Windows XP.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to
start the Windows XP operating system.
4. Open the Display Properties window by clicking
Start
->
Settings
->
Control Panel
and then double-clicking on the
Display
icon.
5. Click the
Settings
tab.
6. Click the
Advanced
button.
7. Click the
Monitor
tab.
8. Click the
Properties
button.
9. Click the
Driver
tab.
10. Open the Hardware Update Wizard window by clicking on
Update
Driver
and then click the
Next
button.
11. Select
Install from a list or Specific location(Advanced)
and then
click the
Next
button.
12. Insert the
User’s Guide and Installation Files CD
into the CD drive and
click the
Have Disk
button.
13. Click
OK
.
14. Ensure that the CD drive letter is selected, and then select the
DRIVERS folder.
15. Select IBM L200p monitor and click
OK
. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Installing the device driver in Windows XP
This section must be
completed before continuing
with the Windows XP Image
setup on page 14.
i
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display
quality. For optimal
performance, use either 1600 x
1200 at a refresh rate of 60Hz
or 640 x 480 at a refresh rate
of 60Hz.
