IBM ThinkPad A22e, Supplementary Manual

Page: 43 / 82

5.
Remove the hard disk drive by pulling the cover away from the
computer.
6. Detach the cover from the hard disk drive.
7.
Attach the cover to a new hard disk drive.
8.
Insert the hard disk drive and its cover into the hard disk drive bay; then
firmly install them.
Note: Make sure that the label on the hard disk drive faces to the bottom
of the computer.
9. Reinstall the screw.
Note: You can replace the coin screw with a security screw to prevent
the hard disk drive from being removed easily. The security screw
may not be included in your ship group. You can, however,
purchase screw directly from NABS at www.nabsnet.com.
10. Reinstall the battery.
11. Turn the computer over again. Connect the ac adapter and the cables to
the computer.
Upgrading the hard disk drive
Chapter 2. Solving computer problems
33