At the DOS prompt, type the following:
COPY src_cd:\WIN98\\.\ c:\win98
where
src_cd
is the drive letter of the CD-ROM drive letter of your computer, and
c:\win98
is the temporary directory that you made in step 2 on page 12.
4
Replace the Windows 98 CD-ROM with the Software Selection CD.
Note:
If the “Application Installer” window appears, exit from it.
5
Copy the latest file from the Software Selection CD to the temporary directory of your
computer's hard disk. At the DOS prompt, type the following:
COPY src_cd:\DRIVERS\SUPPLE98\W98GOLD\\.\ c:\win98
where
src_cd
is the drive letter of the CD-ROM and
c:\win98
is the temporary directory that
you made in step 2 on page 12.
6
Run the SETUP.EXE that you copy in the temporary directory (
c:\win98
), and follow the
instructions on the screen.
For details, refer to SETUP.TXT on the Windows 98 CD-ROM.
Note:
If the following message appears while you are reinstalling the Windows 98, go to
“‘Updating the DBLBUFF.SYS’ on page 15” to update the DBBUFF.SYS file. Then
return to step 6 to continue the installation.
Example of the message:
7
After installing Windows 98, make sure the Software Selection CD is in the CD-ROM drive of
your computer; then click Start.
If the “Application Installer” window appears, exit from it.
8
Click Run...
MSGSRV32 caused a general protection fault in module KRNL386.EXE at ððð1:ðð1b51.
MSGSRV32 caused a stack fault in module KRNL386.EXE at ððð1.ðððð5595.
RUNDLL32 caused an invalid page fault in module KERNEL32.DLL at ð15f:bff9dba7.
MSGSRV32 caused an invalid page fault in module KERNEL32.DLL at ð15f:bff9d.
A Fatal Exception ðD has occurred at ðð28:Cððð1FCE in VXD VMM(ð1) + ðððððF
A Fatal Exception ðE has occurred at ð15F:BFF9DBA7.
13