11
To activate the PC Card slot, double-click the PC Card icon in the Control Panel. The PC
Card Wizard window launches. Click No twice, and reboot the system.
12
If required, install Service Pack Version 1, available from the Microsoft Web site.
13
After you complete the installation, remove all the files in the temporary directory and then
remove the directory itself, to free the space on the hard disk.
Installing Windows 95 OSR2.1 or OSR2.5:
If you have a CD-ROM version of the
Windows 95 OSR2.1, do the following:
1
Make sure there is enough space on the hard disk to store the cabinet files and the
installation programs. The amount of space required may vary, depending on the language
supported by your version of Windows 95).
2
Make a temporary directory.
For example, at the DOS prompt, type the following:
MD c:\win95
and press Enter.
3
Insert the Windows 95 CD-ROM into the CD-ROM drive.
4
Copy all the cabinet (.CAB) files and the installation programs from the \win95 directory of
the Windows 95 CD-ROM disk to the temporary directory.
At the DOS prompt, type the following:
COPY src_cd:\WIN95\\.\ c:\win95
where
src_cd
is the drive letter of the CD-ROM drive, and
c:\win95
is the temporary
directory that you made in step 2.
5
Press Enter.
6
Replace the Windows 95 CD-ROM with the Software Selection CD.
7
Copy the updated files in the Windows 95 supplementary files from the Software Selection
CD to the temporary directory.
At the DOS prompt, type the following:
COPY src_cd:\DATA\WIN95\cc\OSR2INF\\.\. c:\win95
where
src_cd
is the drive letter of the CD-ROM,
cc
is the country code, and
c:\win95
is the
temporary directory that you made in step 2.
17
