IBM System x3610, Problem Determination And Service Manual

Page: 66 / 144

Attention: For proper cooling and airflow, replace the air duct before you turn
on the server. Operating the server with the air duct removed might damage
server components.
6. If you are instructed to return the air duct, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Installing the air duct
To install the air duct, complete the following steps.
Air duct
Heat sinks
DIMM
1. Tilt the front of the air duct down and align the tabs on the air duct with the slots
in the fan-bracket assembly.
2. Lower the rear of the air duct into the server.
Attention: For proper cooling and airflow, replace the air duct before you turn
on the server. Operating the server with an air duct removed might damage
server components.
3. Install the cover (see “Installing the cover” on page 46).
4. Slide the server into the rack and tighten the rack release thumbscrews.
5. Reconnect the external cables; then, reconnect the power cords and turn on the
peripheral devices and the server.
Removing an adapter
This topic describes removing an adapter from a PCI slot.
To remove an adapter from a PCI slot, complete the following steps.
48
IBM System x3610 Type 7942: Problem Determination and Service Guide