IBM System x3200 M3
18
Optical drives
The server supports the optical drive options listed in the following table. If two optical drives are installed,
then an internal tape drive cannot be installed in the server.
Table 9. Optical drives
Part
number
Feature
code
Description
Maximum
supported
Standard models
where used
None*
4154
Half-High SATA DVD-ROM
2
22x, 32x, 42x, 54x, 62x, A2x, B2x, C1x, C2x
81Y6404
4155
Half-High SATA Multiburner
2
-
* This option is only available via CTO or is already installed in standard models.
Half-High SATA DVD-ROM supports the following media and speeds for reading:
CD-ROM 48X
CD-DA (DAE) 40X
CD-R 48X
CD-RW 40X
DVD-ROM (single layer) 16X
DVD-ROM (dual layer) 12X
DVD-R (4.7 GB) 16X
DVD-R DL 12X
DVD+R 16X
DVD+R DL 12X
DVD-RW (4.7 GB) 12X
DVD+RW 12X
DVD-RAM (4.7/9.4 GB) 6X
Half-High SATA multiburner supports the same media and speeds for reading as HH DVD-ROM. In
addition, this drive supports the following media and speeds for writing:
CD-R 24X
CD-RW 4X
High Speed CD-RW 10X
Ultra Speed CD-RW 16X
DVD-R 8X
DVD-R DL 8X
DVD+R 8X
DVD+R DL 8X
DVD-RW 6X
DVD+RW 8X
DVD-RAM 3X
I/O expansion options
The server supports six PCI expansion slots. One slot is dedicated to the RAID controller. The
form-factors of available slots are as follows:
Slot 1, PCI-E x8 Gen 2 half-length
Slot 2, PCI-E x8 Gen 2 half-length
Slot 3, PCI-E x1 Gen 2 full-length
Slot 4, PCI 32bit/33 MHz (5 V) full-length
Slot 5, PCI 32bit/33 MHz (5 V) full-length