Installing a storage enclosure
To install a storage enclosure, complete the following steps.
1. Carefully set the storage enclosure on a flat, static-protective surface.
2. Install the hard disk drive bracket and cable assembly (see “Removing and
installing a one-bay or four-bay hard disk drive bracket and cable assembly” on
page 108).
3. Install the hard disk drives in the storage enclosure (see “Removing and
installing a hard disk drive” on page 88).
4. Install the storage enclosure on the system-board tray (see “Installing an
expansion enclosure on a system-board tray” on page 74).
120
System x iDataPlex dx340 Types 6385, 6386, 6389, 7831, 7832, and 7834: Problem Determination and Service Guide
