IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 161 / 232

Procedure
1.
On the ProtecTIER Manager workstation, if it is not already running, run the
ProtecTIER Manager application. To do so:
Click Start
→ Programs → IBM → ProtecTIER Manager 2.3.2.0 → IBM
ProtecTIER Manager .
The ProtecTIER Manager window opens.
2. In the Nodes pane, select the node on which to create the repository.
3. Select Create repository.
The Create repository wizard starts the data collection process. When data
collection is complete, the Welcome window opens.
4. Read the information on the Welcome window, and then click Next.
The Name window opens. See Figure 43.
5. In the Name window, provide the following information:
a.
In the System name field, enter the name of the server on which the
repository is being created.
b. In the Repository name field, enter the name for the repository being
created.
6. Click Next.
The Repository size window opens. See Figure 44 on page 124.
ts760227
Figure 43. Create Repository Name window
Chapter 11. Using ProtecTIER Manager
123