IBM System Storage TS3500, Introduction And Planning Manual

Page: 147 / 290

Power requirements for remote support features
This section describes the power requirements for the remote support features of
the TS3500 Tape Library.
Table 46 lists the power requirements for the devices that comprise remote support.
Table 46. Power requirements for remote support features
Feature
code Description
Input voltage
(see note) Hertz Power usage
2710 Remote support facility 115 or 230 V ac 50 or 60 16 W
2711 Remote support switch 115 or 230 V ac 50 or 60 5 W
2714 LAN switch 115 or 230 V ac 50 or 60 Minimum 50 W
Maximum 120 W
2730 TS3000 System Console
(1U rack mount with
one internal modem) 115 or 230 V ac 50 or 60 Minimum 80 W
Maximum 300 W
Monitor and keyboard
(1U rack mount) 115 or 230 V ac 50 or 60 Minimum 15 W
Maximum 70 W
LAN switch (16 port 1U
rack mount) 115 or 230 V ac 50 or 60 Minimum 50 W
Maximum 120 W
Modem (internal) 115 or 230 V ac 50 or 60 16 W
Modem 115 or 230 V ac 50 or 60 16 W
2732 TS3000 System Console
(1U rack mount with
optional internal
modem [FC 2733]) 115 or 230 V ac 50 or 60 Maximum 600 W
Monitor and keyboard
(1U rack mount) 115 or 230 V ac 50 or 60 Minimum 15 W
Maximum 70 W
Local area network
(LAN) switch (16 port
1U rack mount) 115 or 230 V ac 50 or 60 Minimum 50 W
Maximum 120 W
Note: Input voltage must be supplied by a customer-provided outlet.
Remote support feature 2732 includes ac power cords with IEC-320 C14 plugs that
are suitable for connecting to a customer-supplied power distribution unit (PDU).
Two PDU outlets are required. Remote support features 2710, 2711, and 2714 are
supplied with ac power cords with plugs appropriate for the country code where
the order is shipped.
Chapter 2. Physical planning specifications
123