IBM System Storage TS3310, Maintenance Information

Page: 306 / 531

a. Pinch the latch on the cable connector (
1
in Figure 8-65).
b. Carefully plug in the connector.
5. Engage the cable retention clip.
6.
Perform “Replacing the Y-axis/Picker Assembly” on page 8-57.
7. Perform “Returning a Library or Library Module to Normal Operations after
Repairs” on page 8-4.
Removing the Y Motor from the Y-axis/Picker Assembly in a
Rack-mounted Library
Tools Required:
v Flashlight
v
Small flat blade screwdriver
1. Perform “Preparing a Library or Library Module for Repairs” on page 8-4.
2. Perform one of the following procedures:
v
“Removing a 5U Library (Control Module) from a Rack” on page 8-4
v “Removing a Control Module from a Standalone or Rack-mounted Library
(14U or larger)” on page 8-5
3.
Remove the Y-axis/Picker Assembly. See “Removing the M2 Robot Assembly
from the Library” on page 8-67.
4. Disengage the cable retention clip.
5. See Figure 8-66 on page 8-65. Remove the large black connector.
a. Pinch the latch (
1
in Figure 8-66 on page 8-65) on the cable connector.
b. Carefully lift up on the connector.
a66mi004
1
2
3
Figure 8-65. Y motor connector
8-64
TS3310 Tape Library Maintenance Information