IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 61 / 257

Chapter 3. Installation and Configuration
3-17
Logging in to the Web User Interface
To log in to the Web User Interface, follow the steps below:
1. If necessary, obtain the IP address of the library on the Operator Panel.
a. From the top menu of the Operator Panel, press the Minus key to select View
Current Information , and press Enter.
b. Press the Minus key until the IP Address setting is displayed and make a note
of the IP address.
c. Press the Cancel key repeatedly to log out of the Operator Panel.
2. On your host computer, open Internet Explorer.
Note: Open Internet Explorer on your server or PC to access the Web User
Interface.
3. In the browser address field, enter your library’s IP Address URL to launch the
Web User Interface applet in the browser window. For example,
http://192.168.1.1
When the applet launches, the warning message in Figure 3-16 appears. This
message is normal and
does not indicate a problem.
4. Click Run . To bypass the security warning message each time you start a new
browser session, click the Always trust content from this publisher checkbox.
Figure 3-16. Java security warning message
5. On the Web User Interface login screen, enter the administrator login account
name and default password:
• Account:
admin
• Password: secure
Figure 3-17. Web User Interface login screen
6. Click Login .
a29z0160
a29z0099