IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 59 / 257

Chapter 3. Installation and Configuration
3-15
For complete detailed information on all of the functions available on the library
using both the Operator Panel and the Web User Interface, see Chapter 4,
“Operations,” on page 4-1.
The default library configuration settings are listed in the Table 3-4.
Table 3-4. Default library configuration settings
Configuration Item Default Setting
N
ETWORK
Ethernet link speed Auto
SSL security Disabled
IPv4 settings Enabled
DHCP (Dynamic Host Configuration Protocol) Enabled
Static IP address Disabled
IPv4 address 0.0.0.0
Subnet mask 255.255.255.0
Gateway 0.0.0.0
IPv6 settings Disabled
DHCP (Dynamic Host Configuration Protocol) Enabled
Stateless auto-configuration Enabled
Static IP address Disabled
IPv6 address 0:0:0:0:0:0:0:0
Prefix length 64
Gateway 0:0:0:0:0:0:0:0
DNS setting Disabled
DNS IP address 0.0.0.0
P
HYSICAL
Library name (Blank)
Auto Cleaning Disabled
Bar code label length 8 characters
L
OGICAL
Library mode Random
Loop Enabled
Auto Load Enabled
Active slots 9 + 0
E
NCRYPTION
(S4H
ONLY
)
Encryption method None
Encryption policy Encrypt All
SSL security Disabled
Primary EKM server address 0.0.0.0
Primary EKM TCP port number 3801
Primary EKM SSL port number 443
Secondary EKM server address 0.0.0.0
Secondary EKM TCP port number 3801
Secondary EKM SSL port number 443