IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 49 / 257

Chapter 3. Installation and Configuration
3-5
5. Attach the deskside cover using the 2 large binding-head screws on the rear of
the library (Figure 3-4).
Figure 3-4. Attaching the cover to the library chassis (rear screws)
6. Place the library in the desired desktop location.
Important: Do not place the library on its side. Do not stack objects on top of the
library.
Installing in a Rack
The TS2900 Tape Autoloader can be easily installed into a standard 19-inch rack
system. A standard 19-inch rack system contains multiple mounting locations called
EIA units as defined by the Electronics Industries Association. Each EIA unit contains
three square or round holes used to mount rack designed equipment. The library
requires 1 EIA unit (1U) of rack space. Each unit is separated by a small space.
Table 3-3 lists the parts in the rack mount assembly kit. A Phillips head screwdriver
(preferably with a magnetic head) will be needed to assemble the rack mount kit.
4
a29z0012
4
Table 3-3. Rack mount assembly kit
Number Part Number Quantity Description Part
45E3741 1 Left rear bracket
45E3742 1 Right rear bracket
1
a29z0040
2
a29z0041