IBM System Storage TS2900, Setup, Operator, And Service Manual

Page: 201 / 257

Appendix B. Error Codes
B-9
Drive Error Codes
00F1
Sensor error #2.
Accessor encoder sensor A
error detected during blink
check. Suspect the Accessor
encoder sensor A.
CHK 00F1
Cycle the power supply and try again.
• If the problem is corrected, run Library Verify
before resuming normal library operations.
• If the problem persists, see “Contacting IBM
Technical Support” on page 7-1.
00F2
Sensor error #3.
X encoder sensor error
detected during blink check.
Suspect the X encoder sensor.
CHK 00F2
00F3
Sensor error #4.
Magazine sensor error
detected during blink check.
Suspect the magazine sensor.
CHK 00F3
00F8
Sensor error #5.
X origin sensor error detected
during blink check. Suspect
the X origin sensor.
CHK 00F8
00F9
Sensor error #6.
Cartridge sensor error
detected during blink check.
Suspect the cartridge sensor.
CHK 00F9
00FA
Sensor error #7.
Accessor forward sensor
error detected during blink
check. Suspect the Accessor
forward sensor.
CHK 00FA
00FB
Sensor error #8.
Accessor origin sensor error
detected during blink check.
Suspect the Accessor origin
sensor.
CHK 00FB
Table B-2. Drive error codes
Code (H) Description Panel indication Action Required
0200
Invalid data sent to drive.
NAK detected.
CHK 0200
1. Reseat all cables. See “Reseating Cables” on
page 6-10.
2. Cycle the power supply and try again.
• If the problem is corrected, run Library Verify
before resuming normal library operations.
• If the problem persists, see “Contacting IBM
Technical Support” on page 7-1.
0201
Timeout error occurred while
waiting for response from
drive.
CHK 0201
0203 Drive disconnected. CHK 0203
0205 Drive busy. CHK 0205
0206
Command could not be
executed because drive is not
mounted.
CHK 0206
0220
Drive media eject timeout
detected.
CHK 0220
Table B-1. Library error codes (continued)
Code (H) Description Panel Indication Action Required