IBM System Storage N3150, Installation And Setup Instructions, Page: 12 / 24

3. Using Figure 5 for reference, attach the N3220 filer to the front of the rack using four silver pan head
screws (two for each rail) in the H2 and H5 holes. Thread the screws through the front flange, the
spacer plate, and the rack frame rail into the threaded rail nuts. Tighten the screws using a
screwdriver.
4.
Replace the front bezel of the N3220 filer.
5. From the back of the rack, attach a rear tie-down plate
1
to the left and right rails using four M5
pan head screws (two for each rail)
2
, as shown in Figure 6.
1
n340005
Figure 5. Mounting the N3220 filer in the rack
1
2
exn350015
Figure 6. Attaching the rear tie-down plate
4