IBM System Storage DS3000, Programming Manual

Page: 168 / 652

Note: In previous versions of this command the feature identifier was
remoteMirror
. This feature
identifier is no longer valid and is replaced by
syncMirror
.
Parameters
None
Disable External Security Key Management
This command disables external security key management for a storage subsystem that has full disk
encryption drives.
Syntax
disable storageSubsystem externalKeyManagement
file="fileName"
passPhrase="passPhraseString"
Parameters
Parameter Description
file
The file path and the file name that has the security key. For
example: file=
"C:\Program Files\CLI\sup\seckey.slk"
Important: The file name must have an extension of .slk .
passPhrase A character string that encrypts the security key so that you
can store the security key in an external file.
Notes
Your pass phrase must meet these criteria:
v
The pass phrase must be between eight and 32 characters long.
v The pass phrase must contain at least one uppercase letter.
v
The pass phrase must contain at least one lowercase letter.
v The pass phrase must contain at least one number.
v
The pass phrase must contain at least one non-alphanumeric character, for example, < > @ +.
Note: If your pass phrase does not meet these criteria, you will receive an error message.
Disable FlashCopy
This command stops a copy-on-write operation. This command performs the same action as the legacy
stop
flashcopy
command.
Syntax
disableFlashcopy (logicaldrive [logicaldriveName] |
logicaldrives [logicaldriveName1 ... logicaldriveNameN])
3-122
IBM System Storage DS3000, DS4000, and DS5000: Command Line Interface and Script Commands Programming Guide