Table 10. Enclosure weight as FRUs are installed (continued)
Enclosure assembly
Approximate weight
FRUs installed
FRUs not installed
kg
lb
• Enclosure
• Secondary expansion modules
• Fascia
• PSUs
• Expansion canisters
• Fan modules
• Fan interface board
• 92 3.5-inch Near-Line SAS hard
disk drives
• Cover
138.6
305.6
Conversely, the overall weight of the expansion enclosure is reduced as you remove parts. However, even
with parts removed, the 5U expansion enclosure is heavy. Depending on the number of parts that remain,
you might need four persons or a mechanical lift to support the weight of the expansion enclosure.
Identify the hardware components
You should become familiar with the external components of the 5U expansion enclosure.
Components on the front of the enclosure
Figure 15 on page 26 shows the front of the 5U expansion enclosure. In the figure, all parts are installed
in the enclosure.
Figure 15. Features on the front of the 5U expansion enclosure
1
Display panel indicators
2
Rack retention thumb screws
3
Power
®
supply unit indicators
4
Power supply units (PSUs)
5
PSU fascia (1U)
6
Front fascia (4U)
However, as Figure 16 on page 27 shows, the 4U and 1U fascias are packaged separately. You must
attach them to the front of the 5U expansion enclosure as part of the initial installation process.
26 Storwize V5100 : Quick Installation Guide for MTM 2078-424, 2078-12F, 2078-24F, 2078-92F, and 2078-
U5B
Summary of Contents for Storwize V5100 Series
Page 129: ......
