IBM Storwize V5000 Gen 2 Series, Quick Installation Manual

Page: 59 / 178

Table 14. Weight of expansion enclosure drives (continued)
FRU description FRU part number Comments
Approximate weight per unit
kg lb
15.36 TB 2.5-inch
tier 1 flash drive
01LJ047 For systems with a
1-year warranty
(2077-xxx).
0.224 0.494
7.68 TB 2.5-inch tier
1 flash drive
For systems with a
3-year warranty
(2078-xxx).
0.224 0.494
15.36 TB 2.5-inch
tier 1 flash drive
01LJ048 For systems with a
1-year warranty
(2077-xxx).
0.224 0.494
15.36 TB 2.5-inch
tier 1 flash drive
For systems with a
3-year warranty
(2078-xxx).
0.224 0.494
Note: The part numbers and feature codes for the tier 1 flash drives vary, depending on the model type
and warranty of the Storwize V5000 Gen2 system. Table 15 on page 33 summarizes the warranty
values.
Table 15. Storwize V5000 Gen2 system and warranty summary
System model
1-year warranty 3-year warranty
Storwize V5010 2077-124 2078-124
Storwize V5020 2077-224 2078-224
Storwize V5030 2077-324 2078-324
Storwize V5030F 2077-AF3 2077-AF3
Weight increases as FRUs are installed
The 5U expansion enclosure supports up to 92 SAS drives. As Table 16 on page 33 shows, substantial
weight is added to the enclosure when all drives are installed.
Table 16. Weight of an enclosure with 92 SAS drives
FRU description
Approximate weigh per unit
Maximum
supported
Approximate extra weight
kg lb kg lb
2.5-inch tier 0
flash drive
2.5-inch tier 1
flash drive
0.224 0.494 92 20.608 45.433
2.5-inch hard
disk drive
0.304 0.670 92 27.968 61.659
3.5-inch Near-
Line SAS hard
disk drive
0.876 1.931 92 80.592 177.675
As you install or replace FRUs, the overall weight of the expansion enclosure increases. For example,
Table 17 on page 34 shows the weight progression as different combinations of FRUs are installed.
Chapter 2. Installing the system hardware 33