IBM Storwize V5000 Gen 2 Series, Quick Installation Manual

Page: 145 / 178

Table 26. Storwize V5000 Gen2 system and warranty summary
System 1-year warranty 3-year warranty
Storwize V5010 2077 - 124 2078 - 124
Storwize V5020 2077 - 224 2078 - 224
Storwize V5030 2077 - 324 2078 - 324
Storwize V5030F 2077 - AF3 2078 - AF3
Other expansion enclosure parts
Table 27 on page 119 summarizes the part numbers for other parts. The values are the same for all
Storwize V5000 Gen2 systems that support the 2077-92F expansion enclosure.
Table 27. Other expansion enclosure parts
FRU Part
Number
Description Comments
00AR317 3 m 12 Gb SAS Cable (mSAS HD)
01EJ190 6 m 12 Gb SAS Cable (mSAS HD)
01LJ114 Rail kit
01LJ116 Front fascia (4U front cover)
01LJ118 Display panel assembly
01LJ120 PSU fascia (1U cover) The fascia must be removed to access the
power supply units.
01LJ122 Power supply unit (PSU) The expansion enclosure contains 2 PSUs.
Each PSU requires a C19/C20 power cord.
01LJ124 (use
with enclosure
FRU P/N
01LJ112)
01LJ860 (use
with enclosure
FRU P/N
01LJ607
Secondary expansion module The expansion enclosure supports two-
secondary expansion modules.
Note: The secondary expansion modules
are Tier 2 CRUs. You can replace them or
request that they be replaced by IBM
Service. For example, if the enclosure is
FRU P/N 01LJ112 and it is powered on, you
can contact your service representative to
replace the secondary expansion module.
CAUTION: Use caution when you
are removing or replacing a
secondary expansion module from
an enclosure with FRU part number
01LJ112. Avoid contact with the
connectors on the main board.
01LJ126 Fan module The expansion enclosure contains four fan
modules.
01LJ128 Expansion canister
01LJ130 Cable management arms (CMA) The part contains the upper and lower CMA.
01LJ132 Top cover
01LJ134 Fan interface board
Chapter 2. Installing the system hardware 119