IBM Small J10 Series, Manual

Page: 59 / 70

Figure 28. Installing a Drive Carrier Module (1 of 2)
3. Slide the drive carrier fully into the enclosure.
4. Cam the drive carrier home. The camming foot on the carrier will engage into a slot in the enclosure.
Continue to push firmly until the handle fully engages. A click should be heard as the latch engages
and holds the handle closed.
Figure 29. Engaging a Drive Carrier Module in an Enclosure
Activating the Anti-tamper Locks
1. Carefully put the lock key provided into the cutout in the handle.
2. Position the key into its socket.
3. Rotate the key in a clockwise direction until the indicator is visible in the aperture beside the key.
Chapter 6. Module removal and installation 39