IBM ServeRAID, User Reference

Page: 55 / 226

2. Click Custom configuration .
3. Click Next . The “Create arrays” window opens. If you want to create spanned
arrays, go to step 2 of “Creating spanned arrays” on page 42.
4. Click the appropriate tab in the right pane; then, from the list of ready drives,
select the drives you want to move to the array.
5. Click ( Add selected drives ) to add the drives to the array. You can
click ( Add all drives ) to move all ready drives to an array.
6. Repeat steps 4 and 5 for each additional array or hot-spare drive that you
want to configure.
7. After you select the ready drives for your arrays and hot-spare drive, click
Next . The “Create logical drives” window opens.
Figure 12. “Create arrays” window
Chapter 4. Configuring ServeRAID controllers
39